The Art of Darkness

A Wand for an Artistic Witch

October 13th, 2015 by Cobwebs

Wand DetailA few years ago there was a rather excellent blog called “Seeing Things” which was a trove of Halloween projects. And then, one day…there wasn’t. The entire site was deleted without explanation and the whole wonderful archive of ideas was gone without a trace. This was particularly galling to me since I’d had my eye on one of the projects, a wand for an “Art Witch,” because my sister happens to be both an Art History professor and a Wiccan.

Fortunately, the googles are your friend. I was able to dig up enough of the details to take my own crack at the wand, and my notes are below.

Materials

  • Wooden bobbin, for the body of the wand. Vintage hardwood bobbins used in textile mills from the 1890s – 1940s are a common shabby chic/primitive decorative item and are available on eBay, Etsy, or at flea markets and antique stores. I got mine from Stampington. The original post noted that there was probably all kinds of creative energy already stored up in the wood, so…sure, let’s go with that. (If you don’t want to use a bobbin, a largish wooden dowel should work although you’ll have to drill the ends.)
  • Wooden dowel, small enough in diameter to fit snugly into the hole in the center of the bobbin (optional).
  • Cabinet knob, for the back of the wand. The type used for kitchen and bathroom cabinets is about the right size. I used a faceted crystal knob that I picked up at the hardware store, but I really like these crystal balls too. You can use a metal or ceramic one if you prefer. (You could also use plastic but it seems kind of a shame to get a cool wooden bobbin and then stick a cheap plastic doohickey on the end.)
  • Hanger bolt of the correct size to fit the cabinet knob. This is optional, depending upon how you decide to secure the knob to the wand (see instructions below).
  • Crystal bead, for the front of the wand. I hit the beading section of my local craft store and picked up some natural quartz beads (similar to these, although nowhere near as expensive; the strand cost about $3). Any other small pointy thing should work.
  • Wire, for wrapping the wand. I used 20-gauge wrapping wire. It’s available in all sorts of colors.
  • Wire cutters. Additional wire tools like needlenose pliers are not strictly necessary but are really helpful.
  • Decorative elements, to personalize the wand. I used some metal-rimmed tags from Stampington, some vintage Halloween images (see below), a glass capsule bead from the craft store, some wire connectors, charms, and thin copper chain. Most of the items were found on clearance, so choose whatever appeals to you.


    The little round tags were for “inchies,” which is apparently a scrapbooking term, so I looked for round “inchie” images on Etsy. I finally settled on this set, but these and these were close seconds. If you’re feeling intrepid you can create your own set of images using clipart and your favorite graphic software, but I figured it was worth the four bucks to have all of that done for me. (I did use Photoshop to add the words “Art Witch” to one image before printing, but that’s completely optional.)

  • Hot glue and/or wood glue, depending on how you secure the cabinet knob (see instructions).
  • White glue or Mod Podge (optional, depending on your decorative choices).

Read the rest of this entry »

Posted in Doom It Yourself | 1 Comment »